KrF激光脉冲整形研究

 实验研究了脉冲堆积法对KrF激光的整形能力。利用受激布里渊散射(SBS)压缩脉冲获得了脉宽为3~5 ns的短脉冲，用4束激光堆积获得了脉宽为10~15 ns、平顶宽度为5~10 ns的整形脉冲。利用实测SBS脉冲数据，对脉冲堆积法进行了数值模拟，模拟的脉冲宽度为12.7 ns，平顶宽度为7.7 ns，该结果与实验相符。对脉冲堆积法的任意整形能力进行了模拟，讨论了脉冲宽度变化对整形的影响，发现脉宽变化在5%以内时，对整形脉冲的影响较小。对整形脉冲的放大进行了定性研究，结果表明：平顶脉冲通过放大器后，前沿部分放大较多，由于饱和作用，后沿放大较少；如果前端整形脉冲前沿为斜坡状，放大后可以得到近平顶的脉冲。     

Mode-locked performance of hybrid soliton pulse source utilizing fiber grating external cavity lasers

Mode-locking characteristic of hybrid soliton pulse source (HSPS) utilizing linearly chirped raised-cosine flat top apodized fiber Bragg grating (FBG) is investigated by using coupled-mode equations. It is found that the fundamental repetition frequency range of HSPS is significantly extended by using linearly chirped raised-cosine flat top apodized FBG instead of linearly chirped Gaussian apodized FBG. The range of repetition frequencies over which proper mode-locking is obtained is 2-3.3 GHz with linearly chirped raised-cosine flat top apodized grating whereas this range is 2.1-2.95 GHz with linearly chirped Gaussian apodized grating.     

大电流两电极气体开关研究

 由于引燃管难以满足现在能源系统对放电开关承受大电流的要求，因此研制了大电荷转移量两电极气体开关。这种新型气体开关电极间距可调，无触发极，采用同轴结构，并将主电极置于金属腔体内，减少了放电对绝缘支撑的污染。主电极为铜钨合金材料，设计为平顶圆柱状，以提高烧蚀均匀度和热传导效率，减少电极材料喷溅，延长其寿命。绝缘支撑采用碗状结构，提高了机械强度，增加了沿面击穿距离。该开关工作电压达25 kV，放电电流超过100 kA（脉冲宽度600 μs），单次脉冲电荷转移量达50 C。实验结果显示该气体开关触发性能稳定，电极表面烧蚀均匀，多次大电流实验后电极表面保持完好，可应用于强激光能源系统。     

Chronological protein synthesis in regenerating rat liver

Liver regeneration has been studied for decades; however, its regulation remains unclear. In this study, we report a dynamic tracing of protein synthesis in rat regenerating liver with a new proteomic technique, ³⁵S in vivo labeling analysis for dynamic proteomics (SiLAD). Conventional proteomic techniques typically measure protein alteration in accumulated amounts. The SiLAD technique specifically detects protein synthesis velocity instead of accumulated amounts of protein through ³⁵S pulse labeling of newly synthesized proteins, providing a direct way for analyzing protein synthesis variations. Consequently, protein synthesis within short as 30 min was visualized and protein regulations in the first 8 h of regenerating liver were dynamically traced. Further, the 3.5–5 h post partial hepatectomy (PHx) was shown to be an important regulatory turning point by acute regulation of many proteins in the initiation of liver regeneration.     

Electroanalytical Detection of Cr(VI) and Cr(III) Ions Using a Novel Microbial Sensor

A microbial sensor, namely carbon paste electrode (CPE) modified with Citrobacter freundii (Cf–CPE) has been developed for the detection of hexavalent (Cr(VI)) and trivalent (Cr(III)) chromium present in aqueous samples using voltammetry, an electroanalytical technique. The biosensor developed, demonstrated about a twofold higher performance as compared to the bare CPE for the chosen ions. Using cyclic voltammetry and by employing the fabricated Cf–CPE, the lowest limit of detection (LLOD) of 1x10⁻⁴ M and 5x10⁻⁴ M for Cr(VI) and Cr(III) ions respectively could be achieved. By adopting the Differential Pulse Cathodic Stripping Voltammetric technique, the LLOD could be further improved to 1x10⁻⁹ M and 1x10⁻⁷ M for Cr(VI) and Cr(III) ions respectively using the biomodified electrodes. The reactions occurring at the electrode surface‐chromium solution interface and the mechanisms of biosorption of chromium species onto the biosensor are discussed. The stability and utility of the developed biosensor for the analysis of Cr(VI) and Cr(III) ions in chromite mine water samples has been evaluated.     

Detonability of simple and representative components of pyrolysis products of kerosene: pulsed detonation engine application

The use of liquid fuels such as kerosene is of interest for the Pulse Detonation Engine (PDE). In this context, a representative gaseous mixture of the lighter products resulting from the decomposition of a kerosene of type JP-10 was studied. The detonability limits of simple components (hydrogen, ethylene, propylene) and mixtures of these components were tested in a 50 mm diameter and 2.5 m long detonation tube. This dimension is compatible with the applications of the aircraft industry and more particularly the PDE. The influences of the nitrogen dilution, geometry of the DDT device (Schelkin spiral), ignition energy and initial pressure were investigated. This paper was based on work that was presented at the 19th International Colloquium on the Dynamics of Explosions and Reactive Systems, Hakone, Japan, July 27 - August 1, 2003. Communicated by J.E. Shepherd     

基于变换域PCNN的近红外与彩色可见光融合

针对近红外与彩色可见光图像融合后对比度低、细节丢失和颜色失真等问题,提出一种基于多尺度变换和自适应脉冲耦合神经网络(PCNN-pulse coupled neural network,PCNN)的红外与彩色可见光图像融合的新算法。首先将彩色可见光图像转换到HSI（hue saturation intensity)空间,HSI色彩空间包含亮度、色度和饱和度三个分量,并且这三个分量互不相关,因此利用这个特点可对三个分量分别进行处理。将其亮度分量与近红外图像分别进行多尺度变换,变换方法选择Tetrolet变换。变换后分别得到低频和高频分量,针对图像低频分量,提出一种期望最大的低频分量融合规则;针对图像高频分量,采用高斯差分算子调节PCNN模型的阈值,提出一种自适应的PCNN模型作为融合规则。处理后的高低频分量经过Tetrolet逆变换得到的融合图像作为新的亮度图像。然后将新的亮度图像和原始的色度和饱和度分量反向映射到RGB空间,得到融合后的彩色图像。为了解决融合带来的图像平滑化和原始图像光照不均的问题,引入颜色与锐度校正机制(colour and sharpness correction, CSC)来提高融合图像的质量。为了验证方法的有效性,选取了5组分辨率为1 024×680近红外与彩色可见光图像进行试验,并与当前高效的四种融合方法以及未进行颜色校正的本方法进行了对比。实验结果表明,同其他图像融合算法进行对比分析,该方法在有无CSC颜色的情况下均能保留最多的细节和纹理,可见度均大大提高,同时本方法的结果在光照条件较弱的情况下具有更多的细节和纹理,均具有更好的对比度和良好的色彩再现性。在信息保留度、颜色恢复、图像对比度和结构相似性等客观指标上均具有较大优势。     

脉管制冷用于低温超导磁体冷却的可行性分析

采用制冷机直接冷却的低温超导磁体系统与传统液氮冷却方式相比，具有轻便紧凑、运行简单、维护方便、可长时间连续运行等优点；而脉管制冷由于冷端无运动部件，与传统的G-M制冷机相比，具有结构简单、运行可靠、振动小等优点．本文结合我们在液氮温区脉管制冷方面的技术，从漏热和经济性两方面探讨了将脉管制冷直接用于冷却一个5特斯拉NbTi低温超导磁体的可行性，为后期系统的搭建奠定基础．     

Long pulse generation technology of solid-state laser adopting a new real time multi-discharge method

In this study, a solid-state laser system adopting a new real time multi-discharge method in which three flashlamps are turned on consecutively was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. That is, this study shows a technology that makes it possible to make various pulse shapes by turning on three flashlamps consecutively on a real-time basis with the aid of a program integrated circuit one-chip microprocessor. With this technique, the lamp turn-on delay time can be varied more diversely from 0 to 10 ms and the real-time control is possible with an external keyboard, enabling various pulse shapes. In addition, longer pulses can be more widely used for industrial processing and many medical purposes.     

增益介质的色散对锁模激光器输出脉宽和啁啾的影响

利用时间域内各光学元件的传播矩阵,在考虑了增益介质的色散后,对锁模激光器输出的脉宽和啁啾做了理论方面的推导,并做了相关的数值模拟,结果表明:当不考虑增益介质的色散时,其输出脉宽啁啾值为零;而考虑了增益介质的色散后,啁啾值随色散值的增加先增加而后降低,且存在一个最大值,脉宽随色散值的增加而增加.